一、适用：

适用于棉、麻、丝、涤、睛、及混纺拉架易升华布料的印花

二、外观及组成：

1、外观：白色糊状；

2、离子型：非离子型

3、粘度：140000-160000CPS

4、PH值：7-8

三、特性：

具有很好的抗缓升华的效果，遮盖力强，表面平滑，耐水洗好，牢度佳，不粘手，手感偏硬，防升华效果优，能过针检，属于环保型胶浆。

四、使用方法：

1、本产品一般使用100-120目丝网，根据不同图案使用不同目数；

2、本产品使用后可自然干燥24小时或经过烘道（干燥机）130℃过热2-3分钟；

3、印完后烘道完全烘干，即可马上洗水，其洗水牢度可与同类胶浆比美。

五、注意事项：

1、自然干燥时间与气温和空气湿度有关；

2、储存期：在室温下密闭可存放一年以上，仓库内要阴凉、干燥、通风；

3、使用后内袋应该重新扎实，以防暴露在空气中造成结皮；

4、调色可根据客户需要颜色的深浅来调入色种的分量，颜色调入太多容易引起掉色现象，色种最好控制在6%之内；

5、如印容易掉色的深色布，需要测试颜色是否会升华到胶浆表面上，以减少不必要的损失；

6、使用本产品印花，必要时要进行白胶浆和透明浆相调及搅匀印刷，以免出现裂纹及手感软弱度差的现象；

7、使用透明浆印花，要稍加白胶浆掺和进行调色印花有利于在纺织品面料上印花着色度饱和，更好发挥透明浆的应用效果。

8、由于印花面料的多样化，在特殊针织布上印花时先做小样实验确定以后方可批量生产。未确定情况使用或操作不当引起的质量问题本公司概不负责

TAI ZHOU CITY CONGHUI FINE CHEMICAL INDUSTRY Co;LTD

CH260 Anti-sublimation white（can through needle detector）

一、Scope

Cotton、printing of linen、silk、polyester、eyelet and mixed frame for sublimation.

二、Appearance and Composition

1、Appearance:white paste

2、Ionic type:nonionic

3、Viscosity:140000-160000CPS

4、PH value：7-8

三、Features:

It has a good effect of anti-slow sublimation,strong covering power,smooth surface,good washing resistance,excellent fastness, tack-free,feel hard,excellent effect of anti-sublimation,can through needle detector,belongs to environmental paste.

四、Usage

1、This product generally uses 100-120 mesh screen,according to different patterns uses different mesh.

2、This product can be natural drying for 24 hours or drying at 130℃ for 2-3 minutes.

3、When the product is completely dried through drying tunnel,it can be washed immediately,the washing fastness can be compared with the same kind of glue.

五、Notes

1、The time of natural drying is related to temperature and air humidity;

2、Storage: it can be placed above one year at room temperature,the warehouse should be cool、dry and ventilated.

3、The inner bag should be re-solid after use to prevent skin formation by exposed to air.

4、The toning can adjust the component of color seed according to the depth of color required by customers. Too much toning can easily cause color loss, and color seed should be controlled within 6%.

5、If print on the dark cloth which easy to fade,it necessary to make a test that the color whether sublimate on the surface of base,in order to reduce unnecessary losses.

6、When necessary, the white paste and transparent slurry should be adjusted and mixed evenly for printing, so as to avoid cracks and poor handle softness;

7、The use of transparent paste printing, a little white paste blending tocolor printing is conducive to printing on textile fabrics with chroma saturation, to better play the application effect of transparent paste.

8、Due to the diversity of printing fabrics, small sample experiments are made before mass production.The company shall not beresponsible for quality problems caused by undetermined use or improper operation