本产品适用于化纤,尼龙布。调水浆需加10%—20%水洗牢度特强。
[性质]
外观:乳白色液体
主成分:特殊树脂
离子性:阴离子
含固量: 50%
[保质期]
室温5-35℃,避免暴晒或受冻,一般可贮存1年。
1)易调色,色泽鲜艳饱满。
2)牢度特好,耐水性特强,手感较柔软,流动性好,覆盖力强,花形轮廓清晰。
3)耐黄变(高温下不易泛黄变色)。平整度好。
4)环保指数达国际环保织物要求。
5)手搓不泛白,水洗后手感超柔软,干湿摩擦牢度超好,干擦4级,湿擦3-4级。摩擦痕迹不明显
[应用]滚筒、圆网、平网、手工印花和喷花多种工艺。
[操作工艺]
浆料+色浆+固色剂,根据实际情况调整(Mesh网布80-120目)印花→干燥
有条件:烘干、热处理(130-150℃,3-5分钟)效果更好。
[注意事项]每批次货/每次使用前,必须认真试验,确认后方可使用。
1)选择合适的固色剂可以提高印花面的色牢度与摩擦牢度(注意固色剂的时效性) ,避免使用阳离子色浆和助剂。
2)干透后再进行热处理,可以增加牢度。24-48小时后,方可测试牢度。
Other detailed information
Brand |
Conghui |
Model |
901A |
Viscosity |
/ |
PH Value |
/ |
Odor |
/ |
Strength |
100T |
Fineness |
/ |
Appearance |
Milky white liquid |
Usage |
/ |
Color strength |
100% |
Fluidity |
/ |
Shelf life |
12months |
Single net weight |
50KG |
Resin type |
/ |
Ionic |
Anion |
Appearance color |
/ |
This product is suitable for chemical fiber, Nylon.Adding 10% or 20% slurry to improve the washing fastness.
[Characters ]
Appearance :milky white liquid
Main component :special resin
Ionic : anion
Solid content : 50%
[shelf life]
At room temperature 5-35℃,avoid sun exposure or frozen, can be stored for one year as usual.
1)Easy to mix color,the color is bright and full.
2)Good fastness,super water resistance,soft hand feel,good fluidity,high coverage and clear outline.
3)Resistant to yellowing(it is not easy to turn yellowing at high temperature),good flatness.
4)The environmental indicators reach the requirements of international environmental textile .
5)After hand rubbing,not white,super soft hand feel after washing,excellent wet and dry rub,the dry rub is 4 degree,the wet rub is 3-4degree.The marks of friction are not obvious.
[Application] cylinder、rotary screen、flat screen、handcraft printing and spray.
[operation technology]
Paste+pigment+fixing agent,according actual situation to adjust(80-120mesh screen)printing→drying
If have condition:stoving、heat treat(130-150℃,3-5minutes)better effect.
[Notes] Every batch of goods /before each use, must have test and use after in certain condition.
1)Choosing appropriate fixing agent can improve the color fastness and friction fastness of printing surface(note the timeliness of fixing agent),avoid using cationic paste and auxiliaries.
2)After drying and then making heat treat, it can increase fastness.After 24-48hours,it can make a test about fastness.