一.适用:
本产品适用于棉布,涤棉布、针织、梳织、TC布、腈纶、牛仔布及其它纺织品来做热转印植绒或烫金用途。用于转移植绒及烫金工艺。
二.性能及指标:
乳白色糊状,丙稀酸特殊体合成。
固含量:65±2%
PH值:6.5-7.5
离子电荷:非离子
三.特性:
热转印后的印花图案有极强耐水洗效果。洗水牢度好,弹性高,手感柔软,加入2%1008免烘固化剂可大幅提高牢度。(双组份)
四.操作流程:
印花-自然干将植绒纸或烫金纸放置图案表面压烫机压烫(压烫温度150—170℃,10秒—20秒,然后将植绒纸或烫金薄膜除去)成品(正反压烫二次效果更佳)
五.注意事项:
产品工业使用,禁止儿童接触,若眼睛接触立即用流动清水冲洗15分钟以上,酌情就医。如皮肤接触用肥皂和清水冲洗干净。测试产品务必在涂饰48小时后检测方可达到最佳效果。
Other detailed information
Brand |
Conghui |
Model |
1088 |
Viscosity |
/ |
PH Value |
6.5-7.5 |
Odor |
/ |
Strength |
|
Fineness |
/ |
Appearance |
/ |
Usage |
Color strength |
100% |
|
Fluidity |
/ |
Shelf life |
12months |
Single net weight |
20KG |
Resin type |
/ |
Ionic |
Non-ionic |
Appearance color |
/ |
一.Substrates
This product is suitable for cotton, polyester cotton,knit,woven,TC cloth,acrylic fibers,denim and other textiles to make transfer flock base or gold stamping.It is used for transfer flocking and gold stamping technology.
二.Performance and indicators
Milky white paste,acrylic special polymer
Solid content: 65±2%
PH Value:6.5-7.5
Ionic :non-ionic
三.Characters
After heat transfer printing,the printing pattern has good resistance to wash.good wash fastness,high elasticity,soft hand feel,add 2%1008 free of baking fixing agent to improve fastness.(two-component)
四.Operation process
Printing--dry naturally and place the flocking paper or hot stamping foil on the surface to use press machine to press(press temperature 150-170℃,10-20seconds,and then remove the flocking paper or hot stamping foil.)finished product(press in two sides two times reach better effect.)
五.Notes
Industrial products,banish children to touch,if enters into eyes,using water to rinse more than 15 minutes at instant,or consider to go to hospital.If the skin touch this product,using soap and water to rinse.Making a test for product must after 48hours, so that it could reach the best effect.
Other detailed information
Brand |
Conghui |
Model |
1088 |
Viscosity |
/ |
PH Value |
6.5-7.5 |
Odor |
/ |
Strength |
|
Fineness |
/ |
Appearance |
/ |
Usage |
Color strength |
100% |
|
Fluidity |
/ |
Shelf life |
12months |
Single net weight |
20KG |
Resin type |
/ |
Ionic |
Non-ionic |
Appearance color |
/ |
一.Substrates
This product is suitable for cotton, polyester cotton,knit,woven,TC cloth,acrylic fibers,denim and other textiles to make transfer flock base or gold stamping.It is used for transfer flocking and gold stamping technology.
二.Performance and indicators
Milky white paste,acrylic special polymer
Solid content: 65±2%
PH Value:6.5-7.5
Ionic :non-ionic
三.Characters
After heat transfer printing,the printing pattern has good resistance to wash.good wash fastness,high elasticity,soft hand feel,add 2%1008 free of baking fixing agent to improve fastness.(two-component)
四.Operation process
Printing--dry naturally and place the flocking paper or hot stamping foil on the surface to use press machine to press(press temperature 150-170℃,10-20seconds,and then remove the flocking paper or hot stamping foil.)finished product(press in two sides two times reach better effect.)
五.Notes
Industrial products,banish children to touch,if enters into eyes,using water to rinse more than 15 minutes at instant,or consider to go to hospital.If the skin touch this product,using soap and water to rinse.Making a test for product must after 48hours, so that it could reach the best effect.