仿烫金（银）、彩虹浆系列

Imitation gold-plating (silver-plating)、rainbow printing paste series

一、    产品介绍：

Product  introduction:

仿烫金（银）浆是针对布料需要进行烫金而开发的新产品，无须用烫金箔，直接用仿烫金浆就可以印出烫金的效果或类似烫金效果，仿烫银亦是同理，而彩虹浆则可以根据需要调制各种颜色。

Imitation gold-plating(silver-plating) printing paste is a new product for the cloth needs to be gilded, no need to use gilding foil, use imitation gold-plating printing paste directly to product gilding effect or similar gilding effect, imitation silver-plating printing paste is also in the similar way, while the rainbow printing paste can mix various colors according to need.

二、    产品特性：

Product  characteristics:

我司仿烫金（银）浆、彩虹浆系列，亮度高，手感柔软，水洗牢度强，操作简单，产品性价比高，质量稳定、是一款特殊的新型且环保的浆料。

Our imitation gold-plating(silver-plating)、rainbow printing paste series, has high brightness, soft feel, wash fastness, simple operation, high performance cost ratio, stable quality, is a special new and green printing paste.

三、    使用说明：

Usage  direction :

1、使用前先加入如对牢度有特殊要求或者以防分层，可先加助剂1%调配。

1、If there are special requests of fastness or avoiding be layered, add 1% additive to mix before use.

2、根据客户要求，选择性能好的打底浆（本司建议使用烫金浆、植绒浆、金银粉浆等均可）先打底1-2次。

2、According to customer requests, choose bottoming paste with good performance (we recommend use gold-plating paste, flocking paste, gold and silver powder paste, etc.), first bottom 1-2 times.

3、然后此款产品盖面1-2次，如是彩虹浆，则在使用前根据客户需求，加入色种调色。

3、And then use this product cover the surface 1-2 times, if using rainbow paste, according to customer needs, add color species to mix color before use.

4、自然干透后，使用压机过热，反面压烫，温度100度-180度，时间5-12秒。

4、After natural drying, use the press machine to heat,  press and hot on the negative surface, temperature 100 degrees - 180 degrees, time 5-12 seconds.

注：此款产品放久了会有沉底现像，用之前搅拌均匀即可使用，不影响使用质量。

Note: This product will sink to the bottom if placed for a long time, stir evenly before use, not affect the quality.

特别提醒：我司所提供的资料均以我们的最佳经验为基础，但商品在实际使用的环境和情况各异，故使用前必须小试，方可实施生产。

Special note: The information provided by our company is based on our best experience. Since the actual usage environment and situation are unique, the product should be tested before implementation of production.