三：产品性能：(product performance):

◆ 交联方式：低温自交联，可以室温8℃以上完成交联，焙烘90-120℃，适合隧道和蒸汽烘干。

◆ crosslinking mode: low temperature self-crosslinking above room temperature of 8 DEG C, can complete crosslinking, baking temperature of 90-110 ℃, suitable for tunnel and steam drying.

◆ 交联分子结构：螺旋状结构分子结构，首尾端各有一个键，可多次记忆交联。

◆ crosslinking molecular structures: helical molecular structure, both ends of each have a key, can be many times the memory crosslinking.

◆ 固色原理：以活性基团和极性基团附带颜色基团的粒子和纤维产生电荷达到附着

◆ fixation principle: in the active group and the polar group with color groups of particles and fibers produce charge to attachment

◆ 乳液分子粒径：0.2μm，适应圆网、平网、椭圆机和普通网板400目以下印花，印花后手感柔软。

◆ emulsion molecular size: 0.2 μ m, adapt to the round net, flat screen, elliptical machine and ordinary screen below 400 mesh printing, after printing, soft to the touch

四：特别指导(special guidance):

◆ 产品分子为螺旋链式结构，焙烘后需24小时后恢复常态，手感柔软

The product molecules as helical chain structure, baking after the return to normal after 24 hours, soft to the touch

◆ 产品分子粒径小、结构均匀得色率高，调色时比使用其他粘合剂色浆添加量小

The product molecules with small particle size, uniform structure and yield rate, color than other adhesive paste to add a small amount of

◆ 适印面料：未改性全棉、人棉、棉麻混纺和其他亲水性的自然纤维面料。特别推荐珊瑚绒表面印花（绒毛面），印花水洗后牢度好，手感优异！！

五：各种实验检验参数(the various test parameters):

结论：YS-360在常规使用手感、牢度均达到国内纺织品印花标准，特深色即色浆添加量超过8%需要外加交联剂。

Conclusion: HLA-33Sreached the domestic textile printing standard in the routine use of hand, fastness, special dark namely paste adding volume of more than 8% additional crosslinking agent.

实验原材料(Experimental materials):

◆ 面料：全棉弹力（精梳）180g/㎡,20×15×32片

◆ fabric: cotton stretch (combing) 180g/㎡ , 20 x 15 x 32PIS

◆ 仪器：灰度样卡，YB60对色箱，Y571B摩擦测试仪，Y820热烘箱

◆ instrument: gray card, YB60 color box, friction tester Y571B, Y820 heat oven

◆ 色浆（paste）：采生牌8101大红（born 8101 red cards）

◆ 水(water): 三级水、自然水

◆ 标准：120目网板手工印花后110度焙烘3分钟开始各项测试。

◆ standard: 120 mesh screen printed after 110 degrees bake 3 minutes to start the test.