墙体绘画机使用时要注意哪些事
对于墙体彩绘机可以有很多朋友都不是很了解，其实彩绘机并不是很新颖的电器，只是以前没有用于墙体的种类。墙体画是一种很传统的绘画方式，墙体彩绘机的出现会更加促进墙体画的普通。那么下面就来给大家讲解一下墙体彩绘机使用时要注意哪些事项?


墙体绘画机使用时要注意哪些事项？


　　1、下雨天或即将要下雨时是不能施工的，有光栅的机器在风力过大时也要停止施工，因为风力过大会造成光栅摆动，从而会造成打印的图案出现错位;无光栅的机器受风力的影响小，但是风力太大时也要停止施工，因为风会把喷出来的墨吹散，造成画面模糊。


　　2、注意在机器的正上方有没有空调开启，不要让水滴下来落到机器上;在施工过程中注意机器上的各种线路是否会相互干扰、拉扯，在调整机器与墙面距离时注意喷头不要碰到墙面，以防撞坏喷头;注意水平的调整，平没有调整好会影响图片打印出来的效果。


　　3、在机器工作时尽量不要让无关的人员靠近，同时工作人员也要注意，防止无意中碰掉机器电源，造成机器断电带来不必要的麻烦;在昼夜温差过大的地区，每天在施工之前要打一副图来测试一下光栅是否正常，以免直接上墙造成不必要的麻烦和损失。
What should be paid attention to when using the wall painting machine?
There are many friends who are not familiar with the wall painting machine. In fact, the color painting machine is not a very novel electrical appliance, but it has not been used in the wall before. Wall painting is a very traditional way of painting. The appearance of wall painting machine will promote the common of wall painting. So let's explain to you what should be paid attention to when using the wall painting machine?
What should be paid attention to when using the wall painting machine?
1. In rainy days or when it is about to rain, the construction of machines with grating shall be stopped when the wind is too strong, because the wind will swing the grating, which will cause the printed pattern to be misplaced; machines without grating will be less affected by the wind, but the construction shall also be stopped when the wind is too strong, because the wind will blow the ink out and make the picture fuzzy.
2. Pay attention to whether the air conditioner is turned on at the top of the machine, and do not let the water drop onto the machine; pay attention to whether various lines on the machine will interfere with each other and pull during the construction process, and pay attention to the nozzle not touching the wall when adjusting the distance between the machine and the wall, so as to avoid damaging the nozzle; pay attention to the adjustment of the level, and the adjustment of the level will affect the effect of printing pictures.
3. When the machine is working, try not to let irrelevant personnel near. At the same time, the staff should also pay attention to prevent inadvertently touching the power supply of the machine, causing unnecessary trouble due to the power failure of the machine. In the area where the temperature difference between day and night is too large, a picture should be made every day before the construction to test whether the grating is normal, so as to avoid unnecessary trouble and loss caused by directly going on the wall.